works

storno_cqp6xx_digital_xtal/cqm6xx_app.c

@@ -66,7 +66,7 @@ void setRTXOscMode(storno_xtal_app_t *inst){
 	if(inst->rtx_mode != STORNO_APP_TX_MODE){
 		
 		cm_setOutputEnable(inst->si5351_dev,SI5351_OUTPUT_0,SI5351_OUTPUT_ENABLE); // RX
-		cm_setOutputEnable(inst->si5351_dev,SI5351_OUTPUT_1,SI5351_OUTPUT_ENABLE); // TX
+		cm_setOutputEnable(inst->si5351_dev,SI5351_OUTPUT_1,SI5351_OUTPUT_DISABLE); // TX
 		
 	}else{
 		cm_setOutputEnable(inst->si5351_dev,SI5351_OUTPUT_0,SI5351_OUTPUT_DISABLE); // RX
@@ -82,6 +82,17 @@ void EepromWritePLLParameters(storno_xtal_app_t *inst){
 	
 }
 
+void sendStruct(uint8_t *data, uint8_t size){
+	
+	for(uint8_t idx = 0; idx < size; idx++){
+		
+		cm_uart_send(data[idx]);
+		
+	}
+	
+	return;
+}
+
 void cqm6xx_app_taskHandler(storno_xtal_app_t *inst){
 	
 	// Check Struct
@@ -98,6 +109,20 @@ void cqm6xx_app_taskHandler(storno_xtal_app_t *inst){
 		return;
 	}
 	
+	if(inst->rtx_mode == STORNO_APP_SEND_PLLA_PARAM){
+		inst->rtx_mode = STORNO_APP_RX_MODE;
+
+		sendStruct(&inst->plla_param_data, sizeof(storno_pll_param_msg));
+		return;
+	}
+	
+	if(inst->rtx_mode == STORNO_APP_SEND_PLLB_PARAM){
+			inst->rtx_mode = STORNO_APP_RX_MODE;
+
+			sendStruct(&inst->pllb_param_data, sizeof(storno_pll_param_msg));
+			return;
+	}
+	
 	// If TX pin is not set, then turn on RX output on PLL and disable TX clock. Run setRTXOscMode once, so pll isnt constantly written to!!
 	if((gpio_get_level(GPIO_PORTA,GPIO_PIN_PTT) != GPIO_LEVEL_SET) && (inst->rtx_mode != STORNO_APP_RX_MODE)){
 		
@@ -169,6 +194,13 @@ int uart_rx_event(storno_xtal_app_t *inst, void *rxData){
 		case MSG_PLLB_PARAM:
 			memcpy(&inst->pllb_param_data,rxData,sizeof(storno_pll_param_msg));
 			break;
+			
+		case MSG_GET_PLLA_PARAM:
+			
+		break;
+		
+		case MSG_GET_PLLB_PARAM:
+			break;
 		
 	}
 	
@@ -192,7 +224,7 @@ void cqm6xx_app_init(storno_xtal_app_t *inst, void *si5351_dev){
 	//cm_taskManager_init(&inst->storno_xtal_task);
 	
 	// Check if data is vaild (if this is a new mcu)
-	if(!isEEPROMValid(inst)|| 1){
+	if(!isEEPROMValid(inst)){
 		// If settings are somehow unvalid, then write default settings..
 		writeDefaultSettingsEEprom(inst);
 	}

storno_cqp6xx_digital_xtal/cqm6xx_app.h

@@ -50,6 +50,9 @@ typedef enum {
 	STORNO_APP_RX_MODE = 0,
 	STORNO_APP_TX_MODE = 1,
 	STORNO_APP_PROGRAM_EEPROM = 2,
+	STORNO_APP_SEND_PLLA_PARAM = 3,
+	STORNO_APP_SEND_PLLB_PARAM = 4,
+	
 	
 }storno_app_modes;